home    
  about us  
  projects  
   journeys   
 sponsors 
past projects
recipes from the galley
  contact us  


Slideshows
boat interior
boat exterior
HVAC system

Bridge >> Venturi Project Description

Replacing the tinted, broken venturi.

Pattern Material

We used plywood to make a pattern for cutting the 1/2" acrylic that would become the new venturi.
The plywood was positioned and the design scrutinized. Once I was happy with the location and design, the acrylic could be cut.

Designing Troft

Clear Corners

The 1/2" acrylic was installed with screws and 3M acrylic tape. The 1/2" acrylic is self supporting and does not require additional bracing.
The view from the helm.

Helm View

Tracking

The track is installed on the venturi with 3M tape and 6/32 screws tapped into the 1/2" acrylic.

Copyright 2019
Aqua Epicurean
Promotions, LLC
All rights reserved.
Website Design