about us  
past projects
recipes from the galley
  contact us  

boat interior
boat exterior
HVAC system

Cockpit >> Gunnel Extension Project Description

Progress on this endeavor could only be accomplished with a collaborative effort involving many innovative products, companies and individuals. To find out more about these companies and products, select any one of the company links below.

Sponsors For This Project: MAS Epoxies

Forming Gunnel

We cut core-cell foam to shape and then epoxied it into place as a first step to making the new gunnels. The new hawse pipe figures big into the calculations because it will fit flush to the final teak covering boards.
The old teak as well as the foam on the addition has been glassed over and is now ready for the teak covering.

Ready for Teak

Ready for Teak Treatment

The aft gunnel includes the fishbox. The foam has been glassed and the lid to the fishbox has been cut. It is now ready for the teak covering.
The gunnels were built with the hawse pipe in mind. The intent is that the hawse pipe will be flush with the teak covering. We designed the hawse pipe before the extention had been completed and the port side did not fit exactly as we had anticipated. However, with a little carpentry magic, when installing the teak it should not be a problem. The gunnel was glassed directly onto the hull portion and thus ties it all together.

All Together

Copyright 2024
Aqua Epicurean
Promotions, LLC
All rights reserved.
Website Design