home    
  about us  
  projects  
   journeys   
 sponsors 
past projects
recipes from the galley
  contact us  


Slideshows
boat interior
boat exterior
HVAC system

Hull & Deck >> FloScan Install Project Description

Installing FloScan equipment in the engine room involves lumber and electrical work.

Progress on this endeavor could only be accomplished with a collaborative effort involving many innovative products, companies and individuals. To find out more about these companies and products, select any one of the company links below.

Sponsors For This Project: FloScan Instrument Company, Inc.

Return Mechanism

Bruce installed the return portion of the FloScan on the inboard side of each motor. With the part in place he made a "dry run" with PVC-type water tube to determine the best route for the fuel line. The result of this exercise gave Bruce the dimensions for the actual fuel lines without any expensive mistakes.
The main part of the FloScan was mounted forward and above each motor. Bruce then did the same exercise as for the return to net exact measurments for the actual fuel lines. Note that both return and main have been mounted in areas that give easy access. FloScan is an important part of engine monitoring and cruising saftey.

Main

Bruce

Bruce is making the fuel lines to connect the FloScan. These lines are all USCG approved. Bruce knows how the lines should be run and is making a very clean installation.
It takes a cut-off saw to cut the fuel line hose. Bruce has the right equipment to install the ends on the lines. The red hose you see in the background are the models for the actual hose he is fabricating.

Fuel Lines

Copyright 2019
Aqua Epicurean
Promotions, LLC
All rights reserved.
Website Design